Outboard Motor,18HP 2-Stroke Outboard Motor Engine Fishing Boat Motor Air Cooling System Durable Cast Aluminum Construction for Superior Corrosion Protection

Description

Must Read before using!
Two stroke 18 hp:
Firstly, Fill the gear oil (open gear box lid and fill it).
Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.
Thirdly, Fill engine oil don’t exceed the head of the pattern.
Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%. Then, Rapidly pull the starter line.
After the motor start, please turn the throttle to running state.
Then, it can be operated now.

Don’t do the following will avoid cylinder Scoring:
1，start the motor in the water
2, use the motor when it stop cyling water
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached , and still after fixing it every time you go into any gear it gets unattached second, the starting rope doesn’t retract all the way when you attend to start the engine
Brand: HANGKAI
Displacement: 246CC
Short shaft ：40cm
Gear ratio: 2.08(27:13)
Cylinder: 2
Max.Output(kw): 13.2
Max.speed(r/min): 5000-6000
Gear Positions: F-N-R
Packing size: 133x71x38.5cm
Ignition System: CDI
Cooling System: Water-cooling
Control System: Tiller control
Starting System: Manual start
Control System: #93 gasoline
N.W./G.W.(kgs): 38.6/49.5
Bore x Stroke(mm): 56×50
Recommended Propeller range: 3 -9″1/4”x8″
Recommended Lubricant: 2 Stroke Lubricating oil
Mixing ratio: Fuel:oil=50:1
Trim and tilt system: Manual Tilt
Overall LxWxH(cm): 78.3×33.2×105.3
Standard fuel tank capacity: 24L