6HP 4 Stroke Outboard Motor Boat Engine Heavy Duty Outboard Motor with Air Cooling System Superior Outboard Motor Gas Boat Fishing Boat Engine for Aquaculture Fishing Outdoor Adventure
$480.00
| Brand | Eapmic |
| Material | Aluminum, Plastic |
| Engine Type | 4 Stroke |
| Operation Mode | Electronic |
| Recommended Uses For Product | For Inflatable Boats, For Canoe, For Fresh Water, For Small Yachts, For Salt Water, For Fishing Boats See more |
| Mounting Type | Engine |
| Fuel Type | Gasoline |
| Maximum Horsepower | 6 Horsepower |
| Fuel Capacity | 1.2 Liters |
| Manufacturer | YUINDY |
Description
Specification
Material: Aluminium Alloy, Rubber
Displacement: 140CC
Gear Ratio: 1:1.5(16/24)
Cylinder: 1
Max.Output: 3.75kw
Rotation: 4500-5500r/min
Speed: About 4-15km/h(2.49-9.32Miles/h)
Gear Positions: F-N
Ignition System: TCI
Cooling System: Air-cooling
Control System: Tiller Control
Starting System: Manual Start
Control System: #92 Gasoline
Recommended Engine Oil: Four Stroke Engine Oil
Mixing Ratio: Pure Gasoline
Trim and Tilt System: Manual Tilt
Fuel Consumption: About 1L/H(0.26gal/H)
Standard Fuel Tank Capacity: 1.2L/0.32gal
Bore Stroke: 6.1*4.8cm/2.4*1.89in
Shaft Length: 38.1cm/15in
Adaptive Transom Plate Height: ≤44cm/17.32in
Recommended Propeller Range: 3-7 1/2”x5”
Propeller Diameter: 16cm/6.3in
Joystick Length: 39cm/15.35in
Handle Length: 15cm/5.91in
Oil Filling Pipe Length: 13cm/5.12in
Product Height: 107cm/42.13in
Gross Weight: 24.45kg/53.9lbs
Product Size: 38*33*107cm/14.96*12.99*42.13in
Package Size: 112.5*46*47.5cm/44.3*18.11*18.7in
Package Included
1* Outboard Engine
1* Funnel
1* English User Manual
Notes
1. Please carefully read the manual and strictly follow the precautions.
2. Please measure the height of your boat before purchasing to ensure suitability for this product.
3. Please start the motor in the water.
4. Please note that this product should use 92 # unleaded gasoline, and an appropriate amount of 4-stroke engine oil needs to be added through a dedicated oil filling hole for lubrication.
5. Please do not drive too fast during the running-in period. After the running-in period, the gear oil needs to be replaced, and the second replacement time is about 100 hours or 6 months later.
